4-18 Control Functions
[1]. Rear Carrier
NOTE:
Goods must be tied securely and placed in
the middle of the luggage carrier. Otherwise,
the ATV may be out of balance, and effect
the driver's control of the ATV.
Front/rear shock absorber adjustment
The spring preload can be adjusted to match
the rider’s weight and riding conditions.
NOTE:
When adjusting the rear shock absorbers, the
rear wheels may need to be removed. (See
pages 8-35—8-37 for removal and installation
procedures.)
Spring Adjustment Principles:
When there is only a driver riding on a flat
road, adjust the shock absorber to be a little
softer.
Driving at higher speeds or on flat roads,
adjust the shock absorber to be a little stiffer.
For off-road, adjust the shock absorber to be
To Next Page
Loading...
