5-2 Pre Operation Check List
Axle boots ● Check each boot for tears or leaks. P8-19
Instrument Panel ● Check and be sure all the instrument indicators are working properly. P4-3
Warning Lights ● Check and be sure all the warning lights function normally on the panel. P4-2
EFI System ● Check for any fault codes on the panel; repair the EFI system if necessary. P8-5
WARNING
POTENTIAL HAZARD
Failure to inspect the ATV before operating.
Failure to properly maintain the ATV.
WHAT CAN HAPPEN
This increases the possibility of an accident or equipment damage.
HOW TO AVOID THE HAZARD
Always inspect your ATV each time you use it to make sure the ATV is in safe operating condition.
Always follow the inspection and maintenance procedures and schedules described in this
Owner’s Manual.
To Next Page
Loading...
