CROSSJET AC 92-18 - English

CONTENTS
ES DECLARATION OF CONFORMITY 29
INTRODUCTION 30
1. WORK AND SAFETY PRECAUTIONS 31
1.1 SAFETY INSTRUCTIONS 31
1.1.1 WORKING ON SLOPE 33
1.1.2 WHAT NOT TO DO 33
1.1.3 CHILDREN SAFETY 34
1.1.4 FIRE SAFETY 34
2. DESCRIPTION AND USE 35
2.1 USING YOUR MACHINE 35
2.2 TECHNICAL DESCRIPTION 35
2.3 MARKINGS
3. TECHNICAL PARAMETERS 37
4. UNPACKING 38
4.1 INSPECTION AFTER UNPACKING 38
4.1.1 PACKAGE DISPOSAL 38
4.2 SETTING YOUR MACHINE FOR WORK 38
4.2.1 STEERING WHEEL INSTALLATION 38
4.2.2 SETTING THE STEERING WHEEL HEIGHT 38
4.2.3 SEAT ASSEMBLY 38
4.2.4 SETTING THE SEAT POSITION 38
4.2.5 INSTALLATION OF PROTECTIVE FRAME 38
4.2.6 CONNECTING THE BATTERY 38
5. GETTING STARTED 39
5.1 BY-PASS 39
5.2 ENGINE OIL LEVEL INSPECTION 39
5.3 BATTERY INSPECTION 39
5.4 FILLING YOUR TANK WITH GASOLINE 39
5.5 HYDRAULIC FLUID INSPECTION 39
5.6 INSPECTION OF THE HYDRAULIC SYSTEMFOR LEAGAGE
6. CONTROLLING YOUR MACHINE 40
6.1 DESCRIPTION AND FUNCTIONS OF CONTROL ELEMENTS 40
6.1.1 MOWING DEVICE SWITCH 40
6.1.2 IGNITION BOX 40
6.1.3 GAS LEVER 40
6.1.4 CHOKE 40
6.1.5 TRAVEL CONTROL LEVER 40
6.1.6 HEADLIGHT SWITCH 40
6.1.7 OPERATIONAL HOURS COUNTER 41
6.1.8 MOWING DEVICE LIFTING LEVER 41
6.1.9 BY-PASS LEVER 41
6.1.10 BREAK PEDA 41
6.1.11 PARKING BREAK LEVER 41
6.1.12 DIFFERENTIAL LOCK LEVER 41
6.2 OPERATION AND USE 42
6.2.1 STARTING THE ENGINE 42
6.2.2 STOPPING THE ENGINE 42
6.2.3 TURNING THE MOWING MECHANISM ON AND OFF 42
6.2.4 SETTING THE HEIGHT OF THE MOWING MECHANISM 43
6.3 DRIVING 43
6.4 DRIVING SPEED 43
6.5 DRIVING ON A SLOPE
27
39
43