10. MACHINE DISPOSAL
After the operational life of the machine is over, the owner of the machine is responsible for the disposal. Disposal
may be done by:
a) Giving the machine to company that deals with metal waste recycling such as automotive junkyard etc.). You
will receive an applicable receipt when you handed the machine over to the recycling facility.
b) You may dispose off the machine yourself. In this case follow the instructions below:
• Dispose off your machine in accordance with the applicable law of waste management.
• Disassemble the entire machine.
• Clean and lubricate all parts that may be reused at a later time.
• Divide other parts into ecologically harmful (rubber, seals, grease etc.) and ecologically friendly parts.
Handle ecologically harmful parts in accordance with valid waste management law.
• The selection of the parts shall be done according to the applicable waste management catalogue and in
accordance with waste law management. Ecologically friendly waste shall be treated as reusable material.
Seco GROUP a.s. is dedicated to continuous development and improvement of all its machines.
Therefore, some technical differences in terminology may appear in this manual when compared with
the real product.This is normal. Additional prints, copying, publishing and translation of this
publications is prohibited without prior written approval of the Seco GROUP a.s.The manufacturer
reserves the right to change technical parameters of the product, without prior customer notification.
52
To Next Page
