CSZ MICRO-TEMP LT 749 - Before You Call for Service; In-Warranty Repair and Parts; Receiving Inspection; Important Safety Information

TECHNICAL HELP MICRO-TEMP
®
LT, Model 749
OPERATION AND TECHNICAL MANUAL
Page 10 of 75
TECHNICAL HELP
United States and Canada
Cincinnati Sub-Zero Products, LLC. Toll Free 1-800-989-7373
12011 Mosteller Road (U.S.) 24hr Clinical Support 1-513-460-2038
Cincinnati, OH 45241 Fax 1-513-772-9119
www.cszmedical.com
BEFORE YOU CALL FOR SERVICE
To help us better serve you, please have the serial number of your MICRO-TEMP
®
LT unit ready
when you call for parts or service. The serial number is located on the specification label attached
to the unit’s rear panel.
How to read serial numbers:
Example: 121-LT-60000
 12 indicates a manufacturing date of the year 2012
 1 indicates the quarter (first)
 -LT- means MICRO-TEMP
®
LT, Model 749
 60000 indicates that this is the 60,000
th
unit of a certain model
IN-WARRANTY REPAIR AND PARTS
All parts on your MICRO-TEMP
®
LT unit are covered by a one year warranty (parts and labor if
returned to CSZ). To return defective parts or units, first obtain a Returned Materials
Authorization (RMA) number from our Medical Technical Service department.
RECEIVING INSPECTION
After unpacking the MICRO-TEMP
®
LT System, be sure to inspect the system for concealed
damage. Retain all packing material and carefully describe or photograph any damage. Notify
the carrier at once and ask for an inspection (in writing). Failure to do this within 15 days may
result in loss of claim. Do not return the equipment to Cincinnati Sub-Zero. Call our Medical
Technical Service department for further instructions.
IMPORTANT SAFETY INFORMATION
Refer to this manual for instructions and caregiver information. Read and understand all
precautionary information before using, prescribing, or servicing the MICRO-TEMP
®
LT unit.