Chapter 3. Set-Up
3-6
IPoA or EoA
PC
VPI:0, VCI:33
Encapsulation: LLC
DSLAM
ISP
BAS
IP: 192.168.0.1
Netmask: 255.255.255.0
LAN
WAN
IP: 10.1.2.1
Netmask: 255.255.255.0
Gateway: 10.1.2.2
DNS: 168.95.1.1
Router
IP: 192.168.0.2~51
Netmask: 255.255.255.0
Gateway: 192.168.0.1
IP: 10.1.2.2
Netmask: 255.255.255.0
Type the Wan Parameters;
VPI: 0
VCI: 33
AAL5 Encap: LLC
Protocol: IPoA , EoA , IPoA + NAT or
EoA + NAT
Click Next to setup the IP parameters.
For more understanding about NAT,
review NAT/DMZ in page 3-15.
IP Address: 10.1.2.1
Subnet mask: 255.255.255.0
Gateway: 10.1.2.2
DNS Server 1: 168.95.1.1
Click Next
The screen will prompt with the parameters to be written to Flash. Check the parameters before
writing to Flash. Press Restart to restart the router with the new configuration or press continue to
setup other parameters.
Congratulation! You are done. Your SHDSL Internet connection is established.
To Next Page
Loading...
Need help?
General
