CTC Union SHDTU03-ET10R - Page 53

Chapter 6. Status
6-3
CPE Side
Click Bridge and CPE Side to setup
Bridging mode of the Router and
then click Next.
LAN Parameters
Enter IP: 192.168.0.2
Enter Subnet Mask: 255.255.255.0
Enter Gateway: 192.168.0.2
Enter Host Name: SOHO
WAN1 Parameters
Enter VPI: 0
Enter VCI: 32
Click LLC
Click Next
The screen will prompt with the new configuration parameters. Check the parameters and Click
Restart The router will reboot with the new settings.