Curtis MultiMode 1215-8 User Manual

Curtis 1214-/15-/19-8 Manual 23
6 — PROGRAMMER MENUS
Program Menu Notes
(For more detail on these options, see Appendix A: Glossary of Features and Functions.)
* Throttle types
Type 1: 5kΩ–0
Type 2: 0–5V, 0–10V, 3-wire pot, and electronic throttles
Type 3: 0–5kΩ
† HPD types
Type 0: no HPD
Type 1: HPD fault unless KSI input and brake input before throttle input
Type 2: HPD fault unless KSI input before throttle input
‡ SRO types
Type 0: no SRO
Type 1: SRO fault unless brake input before direction input
Type 2: SRO fault unless KSI before brake input before direction input
Type 3: SRO fault unless KSI before brake input before forward input
Test Menu (not all items available on all controllers)
FORWARD SWI TCH Forward switch: on/off
REVERSE SWI TCH Reverse switch: on/off
BRAKE SWI TCH Brake switch: on/off
THROTTLE % Throttle reading, in percent of full
SPEED SWI TCH Speed switch: on/off
EMR REV SWI TCH Emergency reverse switch: on/off
FWD CONTACTOR Forward contactor: on/off
REV CONTACTOR Reverse contactor: on/off
BATT VOLTAGE Battery voltage
HEAT S I NK ° C Heatsink temperature
MAX TEMP ° C Maximum temperature seen *
MIN TEMP ° C Minimum temperature seen *
* Maximum/minimum temperatures recorded while controller
active. After controller power is cycled, the initially recorded
temperatures will be accurate only to within 10°C.

Curtis MultiMode 1215-8 Specifications

General

Brand	Curtis
Model	MultiMode 1215-8
Category	Controller
Language	English