Custom Audio Electronics K3 - Paper Specification for Non-Thermal Side

The following image shows the placement of the black mark on the non-thermal side of the paper.
The black mark can be placed either in the position P1 or P2 (paper width 58 mm or 60 mm) or even as a P3 (paper width
80 mm).
For more information about the use of paper with black mark see chapter 7.
5
+1
0
9
+1
0
7
40 mm
PAPER WIDTH 80 mm
PAPER WIDTH 60 mm
PAPER WIDTH 58 mm
7
40 mm
min 50
NON-THERMAL SIDE
P3P2P1
NOTE:
Paper width 58 mm and 60 mm are available only with adapter paper guide provided as accessory (see chapter 11).
107