Custom Audio Electronics K3 User Manual

8.3 Cleaning
For periodic cleaning of the device, see the instructions below
Sensors
1
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
2
Clean the device sensors
by using compressed air.
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent
Disconnect the power supply cable and
open the device cover (see paragraph 5.1).
90

Custom Audio Electronics K3 Specifications

General

Brand	Custom Audio Electronics
Model	K3
Category	Printer
Language	English