Custom Audio Electronics K3 - Planning of Cleaning Operations

8.2 Planning of cleaning operations
The regular cleaning of the device keeps the print quality and extends its life.
The following table shows the recommended planning for the cleaning operations. If you use the device in dusty environ-
ments, you must reduce intervals between cleaning operations.

EVERY PAPER CHANGE
Printhead Use isopropyl alcohol
Platen roller Use isopropyl alcohol
EVERY 5 PAPER CHANGES
Autocutter Use compressed air
Paper path Use compressed air or tweezers
Sensors Use compressed air
EVERY 6 MONTHS OR AS NEEDED
Chassis Use compressed air or a soft cloth
Display
(1)
Use compressed air or a soft cloth
NOTE:
(1) : Only for K3 DSP.
89