6.5 Device status
-
played, the following information is given:
PRINTER TYPE device model
WI-FI MODULE * Wi-Fi module
PRINTING HEAD TYPE print head model
INTERFACE interface present
ETHERNET TYPE ethernet connector present
PROGRAM MEMORY TEST OK appears if functioning and NOT OK if faulty
DYNAMIC RAM TEST OK appears if functioning and NOT OK if faulty
EXTERNAL MEMORY TEST OK appears if functioning and NOT OK if faulty
CUTTER TEST OK appears if functioning and NOT OK if faulty
HEAD VOLTAGE voltage of the head
HEAD TEMPERATURE temperature of the head
POWER ON COUNTER number of power-ups made
PAPER PRINTED centimetres of paper printed
CUT COUNTER number of cuts performed
NOTES* :
Only for K3 Wi-Fi and K3 BT models.
64
To Next Page
Loading...
