Press the “Bluetooth” icon.
Bluetooth
Move the switch to ON to enable the Bluetooth
communication and start searching
for available devices .
Press the “Settings” icon on your
Android device.
Make sure that the “Wireless” parameter on the printer
is set to “Bluetooth” and that the “AutoReconnect”
parameter is set to “Disabled” (see paragraph 6.4).
6
4
5
Locate your printer (<device_BT ADDRESS>)
and select it with a click.
If parameter “Pairing” on the printer is set to
“Enabled” (see paragraph 6.4) enter the code (1234)
and press the “OK” key to confirm.
If the parameter “Pairing” on the printer is set to
“Disabled” (see paragraph 6.4) pairing is
automatically performed.
Bluetooth
IO
<Bluetooth device>
<Bluetooth device>
Available devices
<device_BT ADDRESS>
1234
1 2 3
Done
4 5
6
7 8
9
0
.
,
Bluetooth paring request
To pair with:
<device_BT ADDRESS>
Type the device’s required PIN
_________________________________
Usually 0000 or 1234
PINcontains letters or symbols
You may also need to type this PIN
on the other device.
Cancel OK
8
7
If the parameter “Pairing” of the printer is set to
“Enabled” (see paragraph 6.6) enter the code (1234)
If the parameter “Pairing” of the printer is set to
“Disabled” (see
paragraph 6.6) pairing is
automatically performed.
47
To Next Page
Loading...
