CYBELEC DNC 60 GS User Manual

PAGE 10 USER GUIDE DNC 60 GS
CORRECTION
key
This key displays the correction page which
allows to make corrections to the current
sequence, as well as to the entire product.
c) The working modes
PROGRAMMING
mode
Allows to introduce, modify and read data as
well as to store, search for and transfer
programs.
MANUAL
mode
Authorizes axis movement and auxiliary
functions using the
keys.
SEMI-AUTOMATIC
mode
Allows a machine cycle with the current
sequence values without automatic sequence
change.
This mode is used for adjustments when
realizing the first product, as well as for
products with only one cut.
The sequence change is made using the
keys.
NB: The product counter Q does not function
in this mode.
AUTOMATIC
mode
Normal mode for product production.
The DNC automatically changes sequence after
each cut.
Changing directly from "programming" mode
automatically forces the first sequence of the
program.
Changing from "programming" mode to "semi-
automatic" mode and then to "automatic"
mode, conserves the current sequence for
execution.
This allows to take up again a product in
production without having to make "empty"
cycles.

CYBELEC DNC 60 GS Specifications

General

Brand	CYBELEC
Model	DNC 60 GS
Category	Control Systems
Language	English