EasyManua.ls Logo

CYBEX ATON Q - Using the Load Leg

CYBEX ATON Q
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
to increase the safety of your child in case of an side
impact pull the L.S.P. out to the nearest door as far as
possible
that the car buckle q is not reaching all the way to the
blue belt slot m
that the car belt is tight and not twisted
that the Aton Q is vertically installed on the car seat
(see marking)
NOTE! The CYBEX Aton Q is exclusively made for
forward facing car seats, which are equipped with a
3-point belt system according to ECE R16.
q
m
that the Aton Q is positioned against driving direction
(the feet of the baby point in the direction of the
backrest of the car seat)
if the car seat is installed in front, that the front-
airbag is deactivated
that Aton Q is secured with a 3-point belt
that the lap belt k is running through the belt slots m on
each side of the baby seat
that the diagonal belt l is running through the blue belt
hook n on the back of the baby seat
INSTALLING THE BABY SEAT CORRECTLY
For the safety of your child please make sure …

Table of Contents

Other manuals for CYBEX ATON Q

Related product manuals