CYBEX ATON Q - Removing the Cover; Attaching the Seat Cover

38
WARNING! The child seat must never be used
without the cover.
NOTE! Do not twist the shoulder straps.
• Open the buckle.
• Remove the shoulder pads from the shoulder belts.
• Pull the headrest cover over the headrest rim.
• Pull the shoulder belts with the buckle tongues out of
the headrest cover.
• Remove the headrest cover.
• Pull the seat cover over the seat rim.
• Pull the buckle through the seat cover.
• Now you can remove the cover part.
REMOVING THE COVER
ATTACHING THE SEAT COVER
The cover consists of 5 parts. 1 seat cover, 1 headrest
cover, 2 shoulder pads and 1 buckle pad. To remove the
cover please follow these steps:
In order to put the covers back onto the seat, proceed in
the reverse order as shown above.
NOTE! Use CYBEX Aton Q covers only!