CYBEX ATON Q User Manual

36
The integrated harness system can be cleaned with a
mild detergent and warm water.
WARNING! Please do not use chemical detergents
or bleaching agents under any circumstances!
WARNING! The integrated harness system cannot
be removed from the baby seat. Do not remove
parts of the harness system.
NOTE! Please wash the cover before you use it the rst
time. Seat covers are machine washable at max. 30°C
on delicate cycle. If you wash it at higher temperature,
the cover fabric may lose colour. Please wash the cover
separately and never dry it mechanically! Do not dry the
cover in direct sunlight! You can clean the plastic parts
with a mild detergent and warm water.
CLEANING
It is important to use only an original CYBEX Aton Q seat
cover since the cover is an essential part of the function.
You may obtain spare covers at your retailer.

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm