CYBEX ATON Q User Manual

34
In an accident the seat can sustain damages which
are invisible to the eye. Therefore the seat should be
replaced immediately in such cases. If in doubt please
contact your retailer or the manufacturer.
PRODUCT CARE
WHAT TO DO AFTER AN ACCIDENT
In order to guarantee the best possible protection for your
child, please take note of the following:
• All important parts of the child seat should be examined
for damages on a regular basis.
• The mechanical parts must function awlessly.
• It is essential that the child seat does not get jammed
between hard parts like the door of the car, seat rail etc.
which might cause damage to the seat.
• The child seat must be examined by the manufacturer
after e.g. having been dropped or similar situations.
NOTE! When you buy a CYBEX Aton Q it is
recommended to buy a second seat cover. This allows
you to clean and dry one whilst using the other one in the
seat.

CYBEX ATON Q Specifications

General

Headrest	Yes
Washing type	Machine wash
Certification	ECE R44/04
Mounting type	Seat belt
Product color	Green
Car seat group	0+ (0 - 13 kg; 0 - 18 months)
Country of origin	Germany
Belt fastening type	3-point
Placement available	Rear-facing
Maximum weight capacity	13 kg
Maximum washing temperature	30 °C
Number of headrest positions	8
Quantity	1

Weight and Dimensions

Depth	650 mm
Width	440 mm
Weight	4600 g
Height (max)	560 mm
Height (min)	390 mm