Cybex FT-360S Functional Trainer Owner’s Manual
Technical
Specifications
Page 2-3
Adjustment Plate
Shall be laser and plasma cut hot-rolled steel and nickel chromium electroplated.•
Hardware
All 3/8” socket head cap screws shall be of grade 8 (or equivalent). All bolts shall be either chromed •
or zinc plated for additional corrosion resistance.
Adjustment Decals
High contrast Lexan decals shall be used for adjustment arms and weight stack to ensure maximum •
readability.
Instructional Placard
Shall provide step-by-step instructions and a picture to illustrate use.•
Placard shall indicate proper positioning, and clearly describe the correct use of machines.•
Counter Balancing
Rotational counter balancing shall be accomplished by the use of a class 2 extension spring.•
Reach counterbalancing shall be accomplished by the use of a 13.35 inch, cylinder dampner.•
Front panel shall be made of clear frosted shatter resistant PETG material.•
To Next Page
Loading...
