D-Link DAP-1360

DAP-1360 Wireless N300 Access Point & Router
User Manual
Overview
Network Functions
• WAN connection types
◦ PPPoE
◦ Static IP
◦ Dynamic IP
◦ Static IP + PPPoE
◦ Dynamic IP + PPPoE
◦ PPTP/L2TP + Static IP
◦ PPTP/L2TP + Dynamic IP
• DHCP server/relay
• DNS relay
• VPN pass-through (PPTP/L2TP)
• Dynamic DNS
• Static IP routing
• Remote management
• Network statistics for each
interface
• IGMP Proxy
• RIP
• Support of UPnP IGD
• WAN ping respond
• Support of SIP
• Support of RTSP
• PPPoE pass through
Wireless Connection
• Supported security settings
◦ WEP
◦ WPA/WPA2 Personal
◦ WPA/WPA2 Enterprise
• MAC filter
• Managing connected stations
• PIN and PBC methods of WPS
• WMM (Wi-Fi QoS)
• Advanced settings
• WDS
• “Client” function (access point
mode)
◦ Wireless network client
◦ Wireless network repeater
• “Client” function (router mode)
◦ WISP repeater
Firewall Functions
• Network Address Translation
(NAT)
• Stateful Packet Inspection (SPI)
• IP filters
• URL filter
• MAC filter
• DMZ
• Prevention of ARP and DDoS
attacks
• Virtual servers
Configuration and Management
• Multilingual web-based interface
for configuration and management
• Access via TELNET
• Firmware update via web-based
interface
• Automatic notification on new
firmware version
• Saving/restoring configuration
to/from file
• Support of remote logging
• Automatic synchronization of
system time with NTP server and
manual time/date setup
• Ping function
• Traceroute utility
Physical and Environmental
LEDs
• Power
• WLAN
• WPS
• LAN
• Internet
Power
• External power adapter DC 12V/0.5А
Buttons
• Power on/off button • WPS/RESET button
Operating Temperature
• From 0 to 40
0
C (from 32 to 104
0
F)
Storage Temperature
• From -20 to 65
0
С (from -4 to 149
0
F)
Operating Humidity
• From 10% to 90% non-condensing
Storage Humidity
• From 5% to 95% non-condensing
Page 9 of 270