DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
Domain
The identifier which shows that a device belongs to the Mesh
network.
IP
The IPv4 and/or IPv6 address of a device.
MAC The MAC address of a device.
Role
The short name for a Mesh network device.
• MASTERAP (Master Access Point): The main device
which provides connection to the Internet.
• RAP (Router Access Point): A subordinate device connected
to the main device via a cable (directly to the main one or via
some subordinate devices connected via a cable).
• MAP (Mesh Access Point): A subordinate device with a
wireless connection.
• WMAP (Wired Mesh Access Point): A subordinate device
connected via a cable to another subordinate device with a
wireless connection.
Signal strength
Available for the Network Overview section only.
The strength of a device's wireless signal.
Uptime
The operational time of a device.
List of Clients
AP MAC
The MAC address of the Mesh network device to which a client is
connected.
Client MAC Address
The MAC address of a client.
Bandwidth The bandwidth at which a client operates.
Wireless mode
The operating mode of a client’s wireless connection.
Status Information on a client’s current state.
Neighbours
MAC
The MAC address of the device to which a Mesh network node is
connected. The MAC address of this node is displayed in the
Neighbour MAC Address field.
Neighbour MAC
Address
The MAC address of the device connected to a Mesh network node.
The MAC address of this node is displayed in the MAC field.
Page 147 of 235
To Next Page
Loading...
