DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter Description
Autonegotiation Modes
To enable the needed data transfer modes, move relevant switches to the right.
Flow control
Symmetric flow control
Move the switch to the right to enable the flow control function for
the port.
Move the switch to the left to disable the flow control function for
the port.
After specifying the needed parameters, click the SAVE button.
If in the future you need to edit the parameters of the access point's port, select the port in the table.
In the opened window, change the needed parameters and click the SAVE button.
Page 156 of 235
To Next Page
Loading...
