DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
To deselect the LAN1 port in the simplified mode, left-click on it (the frame will disappear) and
click the APPLY button.
To deselect the LAN1 port in the advanced mode, select the No value from the Bridged with
drop-down list. Then in the WAN section, select the connection via VLAN which will not be used
any longer and click the DELETE button. Then click the APPLY button.
Page 72 of 235
To Next Page
Loading...
