10/100 Fast Ethernet Switch User’s Guide
Introduction 5
♦ Fully configurable either in-band or out-of-band control via
SNMP based software.
♦ Flash memory for software up-grade. This can be done in-
band via BOOTP/TFTP. D-View or out-of-band console can
also initiate a download request.
♦ Built-in SNMP management: MIB-I (RFC 1156), MIB-II
(RFC 1213), Bridge MIB (RFC 1268) and D-Link proprietary
MIB.
To Next Page
Loading...
