DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
93
Figure 6- 42. Access Profile Configuration (IP)
The following parameters can be set for IP:
Parameter Description
Profile ID(1-255)
Type in a unique identifier number for this profile set. This value can be set
from 1 – 255.
Type
Select profile based on Ethernet (MAC Address), IP address, or packet
content mask. This will change the menu according to the requirements for
the type of profile. Select Ethernet to instruct the Switch to examine the
layer 2 part of each packet header. Select IP to instruct the Switch to
examine the IP address in each frame’s header. Select
Packet Content
Mask to specify a mask to hide the content of the packet header.
Vlan
Selecting this option instructs the Switch to examine the VLAN part of each
packet header and use this as the, or part of the criterion for forwarding.
To Next Page
Loading...
