DES-3550 Layer 2 Fast Ethernet Switch User’s Guide
95
Figure 6- 43. Access Profile Configuration window (Packet Content Mask)
This screen will aid the user in configuring the Switch to mask packet headers beginning with
the offset value specified. The following fields are used to configure the Packet Content
Masks:
Parameter Description
Profile ID(1-255)
Type in a unique identifier number for this profile set. This value can be set
from 1 – 255.
Type
Select profile based on Ethernet (MAC Address), IP address, or packet
content mask. This will change the menu according to the requirements for
the type of profile. Select Ethernet to instruct the Switch to examine the
layer 2 part of each packet header. Select IP to instruct the Switch to
examine the IP address in each frame’s header. Select
Packet Content
Mask to specify a mask to hide the content of the packet header.
Offset This field will instruct the Switch to mask the packet header beginning with
To Next Page
Loading...
