D-Link DGS-1510 Series - Page 257

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
254
specified, all units are displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the information of the storage media available on the system.
Example
This example shows how to display the information of the storage media on all units.
Switch# show storage media-info
Unit Drive Media-Type Size FS-Type Label
---- ----- ---------- ------- -------- -------------
1 c: FLASH 29M FFS
2 c: FLASH 31M FFS
3 c: FLASH 31M FFS
Switch#