D-Link DGS-1510 Series - Page 296

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
293
show ip igmp snooping statistics {interface [INTERFACE-ID] | vlan [VLAN-ID]}
Parameters
interface INTERFACE-ID
Specifies the interface to display port statistics counters.
vlan VLAN-ID
Specifies the VLAN ID to display VLAN statistics.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the IGMP snooping related statistics information.
Example
This example shows how to display IGMP snooping statistics information.
Switch# show ip igmp snooping statistics vlan 1
VLAN 1 Statistics:
IGMPv1 Rx: Report 1, Query 0
IGMPv2 Rx: Report 0, Query 0, Leave 0
IGMPv3 Rx: Report 0, Query 0
IGMPv1 Tx: Report 0, Query 0
IGMPv2 Tx: Report 0, Query 0, Leave 0
IGMPv3 Tx: Report 0, Query 0
Total Entries: 1
Switch#