D-Link DGS-1510 Series - Page 321

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
318
show ip forward-protocol udp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to show all specified UDP ports.
Example
This example shows how to display all specified UDP ports.
Switch#show ip forward-protocol udp
Application UDP Port
-------------------- ---------------
Time Service 37
IEN-116 Name Service 42
TACACS 49
TFTP 69
NetBIOS-NS 137
NetBIOS-DS 138
Switch#