DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
445
Leap indicator. The value is from 0 to 3.
The IP address of the machine peer is synchronized to.
The total roundtrip delay to the primary reference clock.
The total root dispersion to the primary reference clock.
The NTP version that the peer is using.
Flash status word for diagnosing problems.
The peer timer in seconds.
The time that the system clock was last set or corrected.
The time that the request departed for the server at the client.
The time that the request arrived from the client at the server.
The time that replied to the client at the server.
Round-trip delay of each sample in milliseconds.
Clock offset of each sample in milliseconds.
Filter order of each sample.
Offset of the peer clock relative to our clock.
Round-trip delay to the peer.
Approximate error of each sample.
Polling interval in seconds.
Round-trip delay to peer in milliseconds.
Relative time of peer clock to local clock in milliseconds.
51-15 show ntp status
This command is used to display the NTP status.
show ntp status
Parameters
None.
Default
To Next Page
Loading...
