DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
522
Usage Guideline
If the policy name is specified, only the specified policy information is displayed. If the policy name is
not specified, information is displayed for all policies.
Example
This example shows how to display the policy configuration for a policy named “raguard1” and all the
interfaces where the policy is applied.
Switch# show ipv6 nd raguard policy raguard1
Policy raguard1 configuration:
Device Role: host
Target: eth1/0/1-1/0/2
Switch#
To Next Page
Loading...
