D-Link DGS-1510 Series - Page 529

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
526
8021x
Port-based Network Access Control
Protocol
arp
IP Address Resolution Protocol (ARP)
Protocol
dhcp
Dynamic Host Configuration
Protocol
dns
Domain Name Services
Protocol
gvrp
GARP VLAN Registration Protocol
Protocol
icmp
IPv4 Internet Control Message Protocol
Protocol
icmpv6-ndp
IPv6 ICMP Neighbor Discover Protocol
(NS/NA/RS/RA)
Protocol
icmpv6-other
IPv6 ICMP except NDP NS/NA/RS/RA
Protocol
Igmp
Internet Group Management Protocol
Protocol
lacp
Link Aggregation Control Protocol
Protocol
snmp
Simple Network Management Protocol
Manage
ssh
Secured shell
Manage
stp
Spanning Tree Protocol (802.1D)
Protocol
telnet
Telnet
Manage
tftp
Trivial File Transfer Protocol
Manage
web
HTTP and HTTPS
Manage
Example
This example shows how to configure the threshold of ARP protocol packets as 100 packets per
second.
Switch# configure terminal
Switch(config)# cpu-protect type arp pps 100
Switch(config)#
59-5 show cpu-protect safeguard
This command is used to display the settings and status of the Safeguard Engine.
show cpu-protect safeguard
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the settings and status of the Safeguard Engine.
Example