D-Link DGS-1510 Series - Page 532

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
529
59-8 snmp-server enable traps safeguard-engine
This command is used to enable sending SNMP notifications for Safeguard Engine. Use the no form
of this command to disable sending SNMP notifications for Safeguard Engine.
snmp-server enable traps safeguard-engine
no snmp-server enable traps safeguard-engine
Parameters
None.
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Use this command to enable or disable sending SNMP notifications for Safeguard Engine.
Example
This example shows how to enable sending SNMP notifications for Safeguard Engine.
Switch# configure terminal
Switch(config)# snmp-server enable traps safeguard-engine
Switch(config)#