DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
635
Switch# show clock
Current Time Source : SNTP
Current Time : 18:20:04, 2014-07-04
Time Zone : UTC +02:30
Daylight Saving Time : Recurring
Offset in Minutes : 30
Recurring From : Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
Switch#
72-5 show sntp
This command is used to display information about the SNTP server.
show sntp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information about the SNTP server.
Example
This example shows how to display SNTP information.
Switch# show sntp
SNTP Status :Enabled
SNTP Pool Interval : 720 seconds
SNTP Server Status:
SNTP Server Stratum Version Last Receive
---------------------------------------------- ------- ------- ---------------
10.0.0.11 8 4 00:02:02
10.0.0.12 7 4 00:01:02 Synced
10::2 ------- ------- ---------------
FE80::1111vlan1 ------- ------- ---------------
---------------------------------------------- ------- ------- ---------------
Total Entries:4
Switch#
To Next Page
Loading...
