D-Link DGS-1510 Series - Page 648

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
645
Switch#show vlan
VLAN 1
Name : default
Tagged Member Ports :
Untagged Member Ports : 1/0/1-1/0/28
Total Entries : 1
Switch#
This example shows how to display the PVID, ingress checking, and acceptable frame type
information for ports eth1/0/1-1/0/4.
Switch#show vlan interface eth1/0/1-1/0/4
eth1/0/1
VLAN mode : Hybrid
Native VLAN : 1
Hybrid untagged VLAN : 1
Hybrid tagged VLAN :
Ingress checking : Enabled
Acceptable frame type : Admit-All
Dynamic tagged VLAN :
eth1/0/2
VLAN mode : Hybrid
Native VLAN : 1
Hybrid untagged VLAN : 1
Hybrid tagged VLAN :
Ingress checking : Enabled
Acceptable frame type : Admit-All
Dynamic tagged VLAN :
eth1/0/3
VLAN mode : Hybrid
Native VLAN : 1
Hybrid untagged VLAN : 1
Hybrid tagged VLAN :
Ingress checking : Enabled
Acceptable frame type : Admit-All
Dynamic tagged VLAN :
eth1/0/4
VLAN mode : Hybrid
Native VLAN : 1
Hybrid untagged VLAN : 1
Hybrid tagged VLAN :
Ingress checking : Enabled
Acceptable frame type : Admit-All
Dynamic tagged VLAN :
Switch#