D-Link DGS-1510 Series - Page 685

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
682
username: Represent current login user.
Event description: Logout through console.
Log Message: [Unit <unitID>, ] Logout through Console (Username:
<username>)
Parameters description:
unitID: The unit ID.
username: Represent current login user.
Informational
Event description: Login through telnet successfully.
Log Message: Successful login through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
Event description: Login through telnet unsuccessfully.
Log Message: Login failed through Telnet (Username: <username>, IP:
<ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Warning
Event description: Telnet session timed out.
Log Message: Telnet session timed out (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
Event description: Logout through telnet.
Log Message: Logout through Telnet (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
Event description: Login through SSH successfully.
Log Message: Successful login through SSH (Username: <username>, IP:
<ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
Event description: Login through SSH unsuccessfully.
Log Message: Login failed through SSH (Username: <username>, IP:
<ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Critical
Event description: SSH session timed out.
Log Message: SSH session timed out (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
Event description: Logout through SSH.
Log Message: Logout through SSH (Username: <username>, IP: <ipaddr>)
Parameters description:
username: Represent current login user.
Informational