D-Link DGS-1510 Series - Page 688

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
685
Log Message: Spanning Tree instance created (Instance :< Instance-id >)
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default
instance, CIST.
Event description: Use to record action to delete an MST instance.
Log Message: Spanning Tree instance deleted (Instance :< Instance-id >)
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default
instance, CIST.
Informational
Event description: Use to record action to change the STP version.
Log Message: Spanning Tree version change (new version :< new_version>)
Parameters description:
new_version: Running under which version of STP.
Informational
Event description: Spanning Tree MST configuration ID name and revision level
change (name :< name>, revision level <revision_level>).
Log Message: Used to record the configuration name and revision level
changed in the MST Configuration Identification.
Parameters description:
name: The name given for a specified MST region.
revision_level: Switches using the same given name but with a different
revision level are considered members of different MST regions.
Informational
Event description: Use to record action to maps a VLAN(s) to an MST instance.
Log Message: Spanning Tree MST configuration ID VLAN mapping table
change (instance: <Instance-id> add vlan <startvlanid> [- <endvlanid>])
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default
instance, CIST.
startvlanid: The start vid of add vlan range.
endvlanid: The end vid of add vlan range.
Informational
Event description: Use to record action to delete a VLAN(s) from an MST
instance.
Log Message: Spanning Tree MST configuration ID VLAN mapping table
change (instance: <Instance-id> delete vlan <startvlanid> [- <endvlanid>])
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default
instance, CIST.
startvlanid: The start vid of add vlan range.
endvlanid: The end vid of add vlan range.
Informational
Event description: Used to record the event that port role change to alternate
due to guard root.
Log Message: Spanning Tree port role change (Instance :< instance-id >,
<interface-id>) to alternate port due to the guard root
Parameters description:
Instance-id: MST instance id. Instance 0 represents for default
instance, CIST.
Interface_id: The port number which detect the event.
Peripheral
Log Description
Severity
Event description: Fan Recovered.
Log Message: Unit <id>, <fan-descr> back to normal.
Critical