D-Link DGS-1510 Series - Page 699

DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
696
object for one of its communication links is about to
enter the down state from some other state (but not
from the notPresent state). This other state is
indicated by the included value of ifOperStatus.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
LBD
Trap Name
Description
OID
dLbdLoopOccurred
his trap is sent when an interface loop occurs.
Binding objects:
(1) dLbdNotifyInfoIfIndex
1.3.6.1.4.1.17
1.14.46.0.1
dLbdLoopRestart
This trap is sent when an interface loop restarts after
the interval time.
Binding objects:
(1) dLbdNotifyInfoIfIndex
1.3.6.1.4.1.17
1.14.46.0.2
dLbdVlanLoopOccurred
This trap is sent when an interface with a VID loop
occurs.
Binding objects:
(1) dLbdNotifyInfoIfIndex
(2) dLbdNotifyInfoVlanId
1.3.6.1.4.1.17
1.14.46.0.3
dLbdVlanLoopRestart
This trap is sent when an interface loop with a VID
restarts after the interval time.
Binding objects:
(1) dLbdNotifyInfoIfIndex
(2) dLbdNotifyInfoVlanId
1.3.6.1.4.1.17
1.14.46.0.4
LLDP
Trap Name
Description
OID
lldpRemTablesChange
A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to trigger
LLDP remote systems table maintenance polls.
Binding objects:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
1.0.8802.1.1.
2.0.0.1
lldpXMedTopologyChangeDetect
ed
A notification generated by the local device sensing a
change in the topology that indicates that a new
remote device attached to a local port, or a remote
device disconnected or moved from one port to
another.
Binding objects:
(1) lldpRemChassisIdSubtype
(2) lldpRemChassisId
(3) lldpXMedRemDeviceClass
1.0.8802.1.1.
2.1.5.4795.0.
1