DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
698
(1) dEntityExtEnvPowerUnitId
(2) dEntityExtEnvPowerIndex
(3) dEntityExtEnvPowerStatus
Fan status change notification.
Binding objects:
(1) dEntityExtEnvFanUnitId
(2) dEntityExtEnvFanIndex
(3) dEntityExtEnvFanStatus
dEntityExtThermalStatusChg
Temperature status change notification.
Binding objects:
(1) dEntityExtEnvTempUnitId
(2) dEntityExtEnvTempIndex
(3) dEntityExtEnvTempStatus
dEntityExtFactoryResetButton
Press factory reset button notification
Binding objects:
(1) dEntityExtUnitIndex
pethMainPowerUsageOnNotifica
tion
This trap indicates PSE Threshold usage indication is
on, the usage power is above the threshold. At least
500 msec must elapse between notifications being
emitted by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
pethMainPowerUsageOffNotifica
tion
This trap indicates PSE Threshold usage indication is
off, the usage power is below the threshold. At least
500 msec must elapse between notifications being
emitted by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
dPoeIfPowerDeniedNotification
This Notification indicates if PSE state diagram
enters the state POWER_DENIED. At least 500
msec must elapse between notifications being
emitted by the same object instance.
Binding objects:
(1) pethPsePortPowerDeniedCounter
1.3.6.1.4.1.17
1.14.24.0.1
dPoeIfPowerOverLoadNotificatio
n
This trap indicates if PSE state diagram enters the
state ERROR_DELAY_OVER. At least 500 msec
must elapse between notifications being emitted by
the same object instance.
Binding objects:
(1) pethPsePortOverLoadCounter
1.3.6.1.4.1.17
1.14.24.0.2
dPoeIfPowerShortCircuitNotificat
ion
This trap indicates if PSE state diagram enters the
state ERROR_DELAY_SHORT. At least 500 msec
must elapse between notifications being emitted by
the same object instance.
Binding objects:
(1) pethPsePortShortCounter
1.3.6.1.4.1.17
1.14.24.0.3