DGS-1510 Series Gigabit Ethernet SmartPro Switch CLI Reference Guide
700
This trap indicates System change operation mode
from normal to exhaust.
Binding objects:
(1) dSafeguardEngineCurrentMode
1.3.6.1.4.1.17
1.14.19.1.1.0.
1
This trap indicates system change operation mode
from exhausted to normal.
Binding objects:
(1) dSafeguardEngineCurrentMode
1.3.6.1.4.1.17
1.14.19.1.1.0.
2
Unit Hot Insert notification.
Binding objects:
(1) dStackNotifyInfoBoxId
(2) dStackInfoMacAddr
Unit Hot Remove notification.
Binding objects:
(1) dStackNotifyInfoBoxId
(2) dStackInfoMacAddr
dStackFailureNotification
Unit Failure notification.
Binding objects:
(1) dStackNotifyInfoBoxId
dStackTPChangeNotification
The stacking topology change notification.
Binding objects:
(1) dStackNotifyInfoTopologyType
(2) dStackNotifyInfoBoxId
(3) dStackInfoMacAddr
dStackRoleChangeNotification
The stacking unit role change notification.
Binding objects:
(1) dStackNotifyInfoRoleChangeType
(2) dStackNotifyInfoBoxId
The commander switch will send this notification
when its member generates a cold start notification.
Binding objects:
(1) swSingleIPMSID
(2) swSingleIPMSMacAddr
1.3.6.1.4.1.17
1.12.8.6.0.11
The commander switch will send this notification
when its member generates a warm start notification.
Binding objects:
(1) swSingleIPMSID
(2) swSingleIPMSMacAddr
1.3.6.1.4.1.17
1.12.8.6.0.12
The commander switch will send this notification
when its member generates a link down notification.
1.3.6.1.4.1.17
1.12.8.6.0.13