113
I have two DI-808HV Routers, how can I set them up to work with
each other?(continued)
Frequently Asked Questions (continued)
Step 4 In the Local Subnet and Local
Netmask fields enter the network
identifier for the local DI-808HV´s LAN
and the corresponding subnet mask.
Step 5 In the Remote Subnet and
Remote Netmask fields enter the
network identifier for the remote DI-
808HV´s LAN and the corresponding
subnet mask.
Step 6 In the Remote Gateway field
enter the WAN IP address of the remote
DI-808HV and in the Preshare Key field,
enter a key which must be exactly the
same as the Preshare Key that is
configured on the remote DI-808HV.
Step 7 Click Apply.
To Next Page
Loading...
Need help?
General
