33
Home >VPN Settings
Using the Configuration Menu
VPN Settings are settings
that are used to create
virtual private tunnels to
remote VPN gateways. The
tunnel technology supports
data confidentiality, data
origin, authentication, and
data integrity of network
information by utilizing
encapsulation protocols,
encryption algorithms, and
hashing algorithms.
Max. number of
tunnels
Create a name for the tunnel.
NetBIOS broadcast
Check here to enable VPN tunnels. When you are not
using the VPN feature, it is best to keep VPN disabled.
VPN
Method
IPSec VPN supports two kinds of key-obtained methods:
manual key and automatic key exchange. Manual key
approach indicates that the two endpoint VPN gateways
require setting up authentication and encryption key by
the Administrator manually. However, IKE approach will
perform automatic Internet key exchange. Admins of both
endpoint gateways will only need to set the same
pre-shared key.
For more in depth configuration to adjust
manual key or IKE method settings, click
More.
More
Tunnel Name
Select the maximum number of allowable tunnels.
Enable this to allow NetBIOS braodcast over the VPN
tunnels.
To Next Page
Loading...
Need help?
General
