57
Using the Configuration Menu
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-808HV. The DI-
808HV supports SNMP v1 or v2c
Enable SNMP
Get Community
(Simple Network Management Protocol)
Enter the password public in this field to allow “Read only” ac-
cess to network administration using SNMP. You can view the
network, but no configuration is possible wth this setting.
Set Community
Enter the password private in this field to gain “Read and Write”
access to the network using SNMP software. The administra-
tor can configure the network with this setting.
Local
Remote
WAN (Wide Area Network)
LAN (Local Area Network)
SNMP v1
Simple Network Management Protocol (SNMP) is an applica-
tion layer protocl that facilitates the exchange of management
information between nework devices.
SNMP v2
Enhanced version of SNMP v1 with additional protocol opera-
tions such as UDP, IP, CLNS, DDP, and IPX.
To Next Page
Loading...
Need help?
General
