32
Home >DHCP
Using the Configuration Menu
DHCP stands for Dynamic Host Control Protocol. The DI-808HV has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
DI-808HV. The DHCP Server will automatically allocate an unused IP address from the
IP address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
Starting IP
Address
The starting IP address for the DHCP server’s IP assignment.
Ending IP
Address
The ending IP address for the DHCP server’s IP assignment.
Lease Time
The length of time for the DHCP lease.
DHCP Clients List Lists the DHCP clients connected to the DI-808HV. Click
Refresh to update the list. The table will show the Host Name,
IP Address, and MAC Address of the DHCP client computer.
Enable or disable the DHCP service.
DHCP Server
To Next Page
Loading...
Need help?
General
