61
Using the Configuration Menu
Tools> Admin
Password
Remote
Management
To change the passwords, enter the new password twice to
confirm.
You can change the admin and user passwords here. It is recommended that you
change the admin password from the default setting. The default passwords are blank
(no password).
Remote Management allows the device to be configured
through the WAN (Wide Area Network) port from the Internet
using a web browser. A username and password is still
required to access the browser-based management inter-
face.
IP Address
Internet IP Address of the computer that has access to the
DI-808HV. If the IP Address is set to 0.0.0.0, this allows all
Internet IP addresses to access the DI-808HV.
Port
The port number used to access the DI-808HV.
E.g., http://x.x.x.x:8080, where x.x.x.x. is the WAN IP address
of the DI-808HV and 8080 is the port used for the Web Manage-
ment interface.
To Next Page
Loading...
Need help?
General
