64
Using the Configuration Menu
Tools > Firmware
Browse
After you have downloaded the new firmware, click Browse in
this window to locate the firmware update on your hard drive.
Click Apply to complete the firmware upgrade.
Note! Do not power off the unit when it is being upgraded. When the
upgrade is complete, the unit will restart automatically.
You can upgrade the firmware by using this tool. First, check the D-Link support site for
firmware updates at http://support.dlink.com. Make sure that the firmware you want to
use is saved on the local hard drive of your computer. Click on Browse to search the
local hard drive for the firmware that you downloaded from the D-Link website to be used
for the update. Upgrading the firmware will not change any of your system settings but
it is recommended that you save your system settings before doing a firmware upgrade.
To Next Page
Loading...
Need help?
General
