128
How can I set up my DI-808HV to work with a DFL-300 Firewall?
(continued)
Frequently Asked Questions (continued)
Step 6 In the Remote Gateway field
enter the WAN IP address of the remote
DFL-300 and in the Preshared Key field,
enter a key which must be exactly the
same as the Preshared Key that is
configured on the DFL-300.
Step 7 Click Apply. The device will
restart. Click on the Continue button and
then click on Select IKE Proposal.
Step 8 Enter a name for proposal ID number 1 and select Group 2 from the DH Group
dropdown menu.
Step 9 Select 3DES as the Encryption Algorithm and SHA-1 as the Authentication
Algorithm.
Step 10 Enter a Lifetime value of 28800
and then select Sec. as the unit for the
lifetime value.
To Next Page
Loading...
