D-Link DIR-514 - Page 13

9D-Link DIR-514 User Manual
Section 3 - Conguration
Choose this if your Internet connection automatically provides you
with an IP Address. Most cable modems use this type of connection.
Choose this option if your Internet connection requires a username
and password to connect. Most DSL modems use this style of
connection.
Choose this option if your Internet connection requires Point-to-Point
Tunneling Protocol (PPTP).
Choose this option if your Internet connection requires Layer 2
Tunneling Protocol (L2TP).
Choose this connection if you have installed a 4G LTE / 3G wireless
card or smartphone into the DIR-514.
Choose this option if your Internet Setup Provider provided you with
IP Address information that has to be manually congured.
DHCP Connection
(Dynamic IP
Address):
Username
/ Password
Connection
(PPPoE):
Username
/ Password
Connection
(PPTP):
Username
/ Password
Connection
(L2TP):
4G LTE / 3G
Connection:
Static IP Address
Connection:
The subsequent conguration pages will dier depending on the selection you
make on this page.
After entering the requested information,click Next to continue.
This completes the Internet Connection Setup Wizard. Click Connect to save your
changes and reboot the router.