D-Link DIR-514 - Dynamic IP (DHCP)

12D-Link DIR-514 User Manual
Section 3 - Conguration
Dynamic IP (DHCP)
This section will help you to obtain IP address information automatically from your ISP. Use this option if your ISP didn’t provide you with IP address
information and/or a username and password. After modifying any settings, click Save Settings to save your changes.
(Optional) Required by some ISPs.
(Optional) Enter the IP address of the primary DNS server.
(Optional) Enter the IP address of the secondary DNS server.
You may need to change the Maximum Transmission Unit (MTU) for
optimal performance. The default value is 1500.
The default MAC address is set to the Internet port’s physical interface
MAC address on the router. It is not recommended that you change
the default MAC address unless required by your ISP. You can use
the Clone button to replace the Internet port’s MAC address with
the MAC address of your PC.
If you want the router to attempt to automatically reconnect to the
Internet whenever the connection is lost, enable this option.
Host Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
MAC Address:
Auto-reconnect: