D-Link DIR-514 - MAC Address Filter

38D-Link DIR-514 User Manual
Section 3 - Conguration
MAC Address Filter
Tick this box to enable MAC ltering.
Check the box to allow wireless and wired clients with C selected
to connect to this device. You can also select to allow or deny
connections from unspecied MAC addresses.
Check the box to allow wireless clients with A selected can associate
to the wireless LAN. You can also select to allow or deny connections
from unspecied MAC addresses.
This identies the rule.
Specify the MAC address of the computer to be ltered.
Specify the last section of the IP address.
If this box is ticked, the rule will follow the connection control setting
specied in MAC ltering settings specied above.
If this box is ticked, the rule will follow the association control setting
specied in MAC ltering settings specied above.
MAC Address
Control:
Connection
Control:
Association
Control:
ID:
MAC Address:
IP Address:
C:
A:
The MAC (Media Access Controller) address lter option is used to control network access based on the MAC address of the
network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be
congured to ALLOW or DENY network/Internet access. After modifying any settings, click Save Settings to save your changes.